载人潜水器运行管理考核评价体系构建研究          下载免费PDF全文

郑莹  张奕  丁忠军  杨磊 《海洋开发与管理》2020,37(9):40-43

为对载人潜水器运行管理工作进行科学考核评价，保障重大深海装备安全高效运行，文章以“蛟龙”号载人潜水器为例，分析研究了“蛟龙”号载人潜水器的运行管理特点，针对我国科技管理体制和“蛟龙”号载人潜水器的管理技术要求，在结合“蛟龙”号载人潜水器海试与试验性应用实际工作的基础上，建立了科学合理、具备可操作性的考核评价体系。通过在“蛟龙”号载人潜水器运行管理工作中的试应用，充分证明该体系建设方法的有效性，值得在载人无人潜水器等重大装备管理中推广应用。  相似文献   

AUV重力测量的运动加速度建模及平台优选          下载免费PDF全文

张志强  李建成  郑晗  文无敌 《海洋测绘》2020,40(4):9-16

针对适合捷联式重力仪的AUV搭载平台的选型问题,基于国内AUV实际航行数据,分析了多推进器组合、推进器和浮力舱组合、推进器和鳍舵组合等3类AUV的定深航行运动特性;推导了AUV水下航行在3个坐标轴方向上对重力仪产生的运动加速度计算公式,得到运动加速度与AUV水下6个自由度运动要素的解析表达式;基于运动加速度分析,讨论了适用于水下移动重力测量的AUV平台和推进装置设计,进行了AUV搭载平台的优选,并给出了重力仪安装位置建议;选定的AUV实验平台实施移动重力测量验证试验重复线精度达到0.42mGal,验证了搭载平台优选的有效性。  相似文献   

三江源国家公园生态系统服务时空变化及权衡-协同关系   总被引：4，自引：0，他引：4  

郑德凤  郝帅  吕乐婷  徐文瑾  王燕燕  王辉 《地理研究》2020,39(1):64-78

本文基于“当量因子法”、空间自相关及相关系数等方法,定量分析了1990—2015年三江源国家公园生态系统服务的时空变化及生态系统服务间的权衡与协同关系。结果表明：① 1990—2015年,三江源国家公园生态系统服务价值呈不断上升趋势,从研究初期的542.37亿元增加至研究末期的834.70亿元,增长292.33亿元,增幅53.90%,每一阶段平均增长率为9.01%;长江源园区与黄河源园区生态系统服务价值占比情况与三江源国家公园整体情况一致,水域的生态系统服务价值最高,其次为草地、湿地,其中草地与水域提供了各园区90%以上的生态服务;澜沧江源园区的生态系统服务占比则为草地（70.58%）、湿地（23.58%）、水域（3.38%）。② 空间上,长江源园区及澜沧江源园区的生态系统服务价值呈东南高西北低的特征;黄河源园区则呈现西高东低特征。③ 相关分析表明,协同关系是三江源国家公园生态系统服务之间的主导关系,但各生态系统服务之间的相关程度各异。④ 数量方面,4类典型生态服务之间的权衡与协同关系的Moran′s I指数与相关性系数表现一致;空间分析方面,生态系统服务之间权衡与协同关系的异质性显著。  相似文献   

亚热带地区发育于不同母岩风化壳上的红壤磁学特征对比及其环境意义   总被引：1，自引：0，他引：1       下载免费PDF全文

郑兴芬  吕镔  陈梓炫  马兴悦  赵国永 《地球物理学报》2019,62(9):3509-3523

本研究对发育于亚热带地区花岗岩和变质岩风化壳之上的两个红壤剖面进行了系统的环境磁学测量及色度分析，探讨在同一地区不同母质上发育的红壤磁性差异的原因及其环境意义.研究区的两个剖面分别位于福建省南平市高铁北站和纺织厂附近，相距约15 km，气候条件基本相同.研究结果表明：（1）较强磁性的花岗岩母质层上发育的南平北站红壤（NPN），在发育过程因母质层中多畴（MD）颗粒磁赤铁矿化的磁铁矿溶解，剖面上部的淋溶层和淀积层虽以较细的稳定单畴（SSD）颗粒和少量的假单畴（PSD）颗粒磁铁矿为主，但剖面磁性自下而上减弱.相较而言，南纺红壤（NF）剖面发育在磁性较弱的变质砂岩上，其过渡层和母质层以赤铁矿为主，因成壤过程中生成较细的超顺磁（SP）磁铁矿使得土壤淋溶层和淀积层磁性增强；说明母质不同是亚热带地区红壤磁性差异的主要原因.（2） NPN和NF两个剖面的气候条件基本相同，磁性差异比色度指标差异更为显著.亚热带地区因剖面受母质影响显著，整体磁性特征不能反映气候；黄度和红度的比值（b^*/a^*）远小于磁性的差异，说明针铁矿和赤铁矿的比值更能反映研究区的平均气候状况，即反映次生磁性矿物含量的参数为更适合的气候指标.  相似文献   

Dynamic hydraulic jump and retrograde sedimentation in an open channel induced by sediment supply: experimental study and SPH simulation     

ZHENG Xiao-gang  CHEN Ri-dong  LUO Min  KAZEMI Ehsan  LIU Xing-nian 《山地科学学报》2019,(8)

Mountainous torrents often carry large amounts of loose materials into the rivers, thus causing strong sediment transport. Experimentally it was found for the first time that when the intensive sediment motion occurs downstream over a gentle slope, the siltation of the riverbed is induced and the sediment particles can move upstream rapidly in the form of a retrograde sand wave, resulting in a higher water level along the river. To further study the complex mechanisms of this problem, a sediment mass model in the framework of the Smoothed Particle Hydrodynamics(SPH) method was presented to simulate the riverbed evolution, sediment particle motion, and the generation and development of dynamic hydraulic jump under the condition of sufficient sediment supply over a steep slope with varying angles. Because the sediment is not a continuous medium, the marker particle tracking approach was proposed to represent a piece of sediment with a marked sediment particle. The twophase SPH model realizes the interaction between the sediment and fluid by moving the bed boundary particles up and down, so it can reasonably treat the fluid-sediment interfaces with high CPU efficiency. The critical triggering condition of sediment motion, the propagation of the hydraulic jump and the initial siltation position were all systematically studied. The experimental and numerical results revealed the extra disastrous sediment effect in a mountainous flood. The findings will be useful references to the disaster prevention and mitigation in mountainous rivers.  相似文献   

基于电化学法的铬盐清洁生产工艺研究          下载免费PDF全文

冯海涛  董亚萍  梁建  李波  张波  李武  郑竹林 《盐湖研究》2019,27(4):9-17

现有铬盐生产技术阻碍了铬盐行业的清洁化发展,研发新型铬盐生产技术实属必要。中国科学院青海盐湖研究所自行研发出一套以电化学法为基础的铬盐清洁生产工艺,涵盖三条大工艺和四种母系铬盐产品。包括氢氧化钠溶液中电化学氧化铬铁制备铬酸钠联产三氧化二铬和三氧化二铁工艺,离子膜电解法从铬酸钠合成重铬酸钠工艺,以及离子膜电解法从重铬酸钠合成铬酸酐工艺。相比现有铬盐生产技术,该技术的优势主要体现在以下五点:温和化、去渣化、高值化、自动化和高效化。目前相关研发工作业已走出实验室,走过产业化中间试验,正向产业化示范线迈进。  相似文献   

VELOCITY CHARACTRISTICS OF SHANXI AND ADJACENT AREA AND ITS TECTONIC SIGNIFICANCE          下载免费PDF全文

WANG Xia  SONG Mei-qin  ZHENG Yong  AI San-xi 《地震地质》2019,41(1):119-136

In order to acquire a better velocity structure of the crustal and uppermost mantle beneath Shanxi area, we obtain the group and phase velocities of Rayleigh wave of the periods 8s to 50s in Shanxi and adjacent area using ambient seismic noise recorded at 216 broad-band stations. All available vertical-component time series for 2014 have been cross-correlated to yield estimates of empirical Rayleigh wave Green's function. Group and phase velocity dispersion curves for Rayleigh wave are measured for each interstation path by applying frequency-time analysis. It describes finer velocity structure of the crust and upper mantle in Shanxi, which reflects the geological structure characteristics at different depths. The resolution is within 50km and the resolution of part periods can reach 40km.The Rayleigh wave group and phase speed maps at short periods(8~18s and 10~22s)show clear correlations with shallow geological structures. Mountain areas on both sides of Shanxi depression zone show apparent high-velocity anomaly, except for low-velocity anomaly in the Taiyuan Basin, Linfen-Yuncheng Basin and Weihe Basin. Especially, the areas of Youyu County-Pianguan County-Kelan County-Shuozhou City and Jingle County-Lishi District of Lüliang City in Lüliang Mountains, and Yu County-Fuping County-Yi County and Yangcheng County-Licheng County in Taihang Mountains, present higher velocity anomaly. In addition, the velocity is lowest in the Weihe Basin, and the amplitude of low velocity decreases gradually from the south to the north of the basins in Shanxi, which probably is related to the process of gradual stretching and development of the Shanxi rift zone from the southwest to the northeast. The obvious velocity difference across the latitude of 38°N exists at 18~30s period of phase and 24~35s period of group velocity maps, which is probably related to the deep and shallow Moho depth variation in the south and north of Shanxi and the suture zone of ancient blocks including "hard" southern block and "soft" northern block. At the same time, the research result of receiver function reveals that partial melting of the lower crust occurs in the northern Taihang Mountains, while the southern section remains stable(Poisson's ratio is above 0.3 in the northern Taihang Mountains and 0.25~0.26 in the southern section). The phase velocity map at 30~50s period clearly shows NW velocity gradient belt, and the low velocity anomaly in the northeast side may be related to Cenozoic volcanism. Meanwhile, the eastern border of Ordos block is the western faults of central basins in Shanxi depression zone. However, some research results indicate that the above border is Lishi Fault in the surface, inferring that the Ordos block shows a shape of wide in the upper and narrow in the lower part from the surface to deep. The Datong volcanic area at 18~45s period of phase and 24~35s period of group velocity maps shows low velocity of trumpet shape from shallow to deep, related to the upwelling of hot material from lower mantle in the Cenozoic causing a large area of intense magmatic activity. It indicates the more specific upwelling channel of Datong volcanoes simultaneously.  相似文献   

SLIP OFFSET ALONG STRIKE-SLIP FAULT DETERMINED FROM STREAM TERRACES FORMATION          下载免费PDF全文

XU Bin-bin  ZHANG Dong-li  ZHANG Pei-zhen  ZHENG Wen-jun  BI Hai-yun  TIAN Qing-ying  ZHANG Yi-peng  XIONG Jian-guo  LI Zhi-gang 《地震地质》2019,41(3):587-602

Slip rate is one of the most important parameters in quantitative research of active faults. It is an average rate of fault dislocation during a particular period, which can reflect the strain energy accumulation rate of a fault. Thus it is often directly used in the evaluation of seismic hazard. Tectonic activities significantly influence regional geomorphic characteristics. Therefore, river evolution characteristics can be used to study tectonic activities characteristics, which is a relatively reliable method to determine slip rate of fault. Based on the study of the river geomorphology evolution process model and considering the influence of topographic and geomorphic factors, this paper established the river terrace dislocation model and put forward that the accurate measurement of the displacement caused by the fault should focus on the erosion of the terrace caused by river migration under the influence of topography. Through the analysis of the different cases in detail, it was found that the evolution of rivers is often affected by the topography, and rivers tend to migrate to the lower side of the terrain and erode the terraces on this side. However, terraces on the higher side of the terrain can usually be preserved, and the displacement caused by faulting can be accumulated relatively completely. Though it is reliable to calculate the slip rate of faults through the terrace dislocation on this side, a detailed analysis should be carried out in the field in order to select the appropriate terraces to measure the displacement under the comprehensive effects of topography, landform and other factors, if the terraces on both sides of the river are preserved. In order to obtain the results more objectively, we used Monte Carlo method to estimate the fault displacement and displacement error range. We used the linear equation to fit the position of terrace scarps and faults, and then calculate the terrace displacement. After 100, 000 times of simulation, the fault displacement and its error range could be obtained with 95%confidence interval. We selected the Gaoyan River in the eastern Altyn Tagh Fault as the research object, and used the unmanned air vehicle aerial photography technology to obtain the high-resolution DEM of this area. Based on the terrace evolution model proposed in this paper, we analyzed the terrace evolution with the detailed interpretation of the topography and landform of the DEM, and inferred that the right bank of the river was higher than the left bank, which led to the continuous erosion of the river to the left bank, while the terraces on the right bank were preserved. In addition, four stages of fault displacements and their error ranges were obtained by Monte Carlo method. By integrating the dating results of previous researches in this area, we got the fault slip rate of(1.80±0.51)mm/a. After comparing this result with the slip rates of each section of Altyn Tagh Fault studied by predecessors, it was found that the slip rate obtained in this paper is in line with the variation trend of the slip rate summarized by predecessors, namely, the slip rate gradually decreases from west to east, from 10~12mm/a in the middle section to about 2mm/a at the end.  相似文献   

Boussinesq相位解析的海岸水动力学数学模型研究进展     

张尧  谢欣  陶爱峰  王岗  陈新平  郑金海 《海洋通报》2018,(5):481-493

由于在平衡计算效率和精度上具有优势,Boussinesq相位解析数学模型研究不断取得突破,已成为波浪和水流精细化模拟的较优解析方式,为海岸工程、环境、地质等问题提供了实用和高效的研究手段。本文对已有Boussinesq类模型的研究进行了评述,深入探讨其重要发展、实际应用和理论瓶颈,从高阶非静压修正、GPU准三维高性能算法编译、波浪破碎和泥沙运移沉积等4个方面提出未来可能的科学突破方向。  相似文献   

圆钢管约束高强灌浆料局部承压性能研究          下载免费PDF全文

张啸驰  陈建伟  闫文赏  郑玲玲 《地震工程学报》2018,40(3):612-618

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。  相似文献